Kyocera ECOSYS FSC8650DN
Troubleshooting. Jam Codes: 0000 - 0210
*: Refer to figure for paper misfeed indication
| Code | Contents | Conditions | Jam location* |
|---|---|---|---|
| 0000 | Initial jam | The power is turned on when a sensor in the convey- ing system is on. | - |
| 0100 | Secondary paper feed request time out | Secondary paper feed request given by the controller is unreachable. | - |
| 0101 | Waiting for process package to become ready | Process package won’t become ready. | - |
| 0102 | Waiting for toner pack- age to become ready | Toner package won’t become ready. | - |
| 0103 | Waiting for the image- sustaining package to become ready | The image-sustaining package won’t become ready. | - |
| 0104 | Waiting for conveying package to become ready | Conveying package won’t become ready. | - |
| 0106 | Paper feeding request for duplex printing time out | Paper feeding request for duplex printing given by the controller is unreachable. | - |
| 0107 | Waiting for fuser pack- age to become ready | Fuser package won’t become ready. | - |
| 0108 | Waiting for option pack- age to become ready | Option package won’t become ready. | - |
| 0110 | Paper conveying unit open | The paper conveying unit is opened during printing. | E |
| 0111 | Front cover open | The front cover is opened during printing. | - |
| 0112 | Duplex cover open | The duplex cover is opened during printing. | F |
| 0113 | Paper conveying cover open | The paper conveying cover is opened during printing. | E |
| 0114 | BR conveying unit open | The BR conveying unit is opened during printing. | G |
| 0115 | BR eject cover open | The BR eject cover is opened during printing. | G |
| 0131 | MP lift sensor upper limit detection | MP lift sensor 1 (MPLS1) does not turn on within spec- ified time of the MP lift plate rising. | D |
| 0200 | Machine sequence error | A sequence error has caused. | - |
| 0210 | PF paper conveying cover open | The PF paper conveying cover is opened during print- ing. | E |