Konica-Minolta bizhub C7822
Service Mode. Enhanced Security
CE Password
Use
- To set and change the CE password.
- The CE password needs to be 8 to 64 one-byte alphameric characters and symbols.
Default setting
- 9272927292729272
Procedure
• Enter the CE password (8 digits) on the on-screen keyboard.
- Current Password: Enter the currently using CE password.
- New Password: Enter the new CE password.
- Re-Input Password: Enter the new CE password again.
NOTE
- When the following setting leads to the Password Rules [ON], the password with the same letters as well as the password which is same as the previous one cannot be changed.
[Administrator Settings] -> [Security Settings] -> [Security Details] - NEVER forget the CE password. When forgetting the CE password, call responsible person of KMBT.
Administrator Password
Use
- To set and change the administrator password.
- Use this function when the administrator forget the administrator password because a new password can be set without entering the current administrator password with this.
- The administrator password needs to be 8 to 64 one-byte alphameric characters and symbols.
Default setting
- 1234567812345678
Procedure
• Enter the administrator password on the on-screen keyboard.
- New Password: Enter the new administrator password.
- Re-Input Password: Enter the new administrator password again.
NOTE
- When the following setting leads to the Password Rules [ON], the password with the same letters, the password which is same as the previous one and the password of less than eight digits cannot be changed. [Administrator Settings] -> [Security Settings] -> [Security Details]