Konica-Minolta bizhub C650
Service Mode. Function tree 5
✽ The function tree is shown to comply with the format displayed on the screen.
*1: Settings are available only when the optional fax kit (FK-502) is mounted.
*2: It will be displayed only when the optional fax multi line (ML-501) is mounted.
*3: It will be displayed only when the optional finisher (FS-517/608 or FS-519) is mounted.
*4: It will be displayed only when the optional finisher (FS-519) is mounted.
*5: It will be displayed only when the optional finisher (FS-517/608) is mounted.
*6: It will be displayed only when the optional finisher (FS-608) is mounted.
*7: It will be displayed only when the [Internet ISW Set] is set to “ON.”
*8: It will be displayed only when the optional post inserter (PI-503) is mounted.
*9: It will be displayed only when the optional job separator (JS-504) is mounted.
Service Mode | |||
---|---|---|---|
FAX *1 | Line 1 *1 | Modem/NCU *1 | |
NetWork *1 | |||
System *1 | |||
Fax File Format *1 | |||
Communication *1 | |||
List Output *1 | |||
Function Parameter *1 | |||
Initialization *1 | |||
Line 2 *1 | Modem/NCU *1 | ||
Network *1 | |||
Communication *1 | |||
Initialization *1 | |||
Finisher *3 | CB-FN adjustment *4 | Fold&Staple Pos. Adjustment *4 | |
Finisher Check *4 | |||
Punch Regist Loop Size *4 | |||
Punch Horizontal Position *4 | |||
FS-FN adjustment *5 | Center Staple Position *6 | ||
Half-Fold Position *6 | |||
Punch Vertical Position *5 | |||
Punch Horizontal Position *5 | |||
Punch edge detection *5 | |||
Punch Resist Loop Size (Body) *5 | |||
Punch Resist Loop Size (PI) *8 | |||
Tri-Fold Position *6 | |||
2 Position Staple Dist. *6 | |||
Cover Sheet Tray Size Detection*8 | |||
Cover Sheet Feeder Adj.*8 | |||
finisher check *5 | |||
Load Data *5 | |||
Staple option setting | |||
Punch Option setting | |||
Fold power of pages restrict. | |||
Internet ISW | Internet ISW Set | ||
HTTP Setting *5 | |||
FTP Setting *5 | |||
Forwarding Access Setting *5 | |||
Download *5 |