Konica-Minolta bizhub C550
Troubleshooting. Jam 02. Misfeed at tray 1 feed section
Detection timing
Type | Description |
---|---|
Detection of misfeed at tray 1 feed section | • The leading edge of the paper does not turn ON the tray1 vertical transport sensor (PS4) even after the lapse of a given period of time after the tray1 starts to feed paper. |
Detection of paper left in tray 1 feed section | • The tray1 vertical transport sensor (PS4) is turned ON when the main power switch is turned ON, a door or cover is opened and closed, or a misfeed or malfunction is reset. |
Tray 1 feed section loop registration reversing jam | • For paper fed from the tray1, due to a delay in paper arrival, loop forming in front of the timing roller is not complete before the rise timing of the registration motor. |
Tray 1 feed section TOD permit waiting jam | • For paper fed from the tray1, TOD permit continues to be disabled for a predetermined period of time after the timing of TOD output. |
Relevant electrical parts
Take-up motor (M22)
Tray 1 paper feed clutch (CL1)
Tray1 vertical transport sensor (PS4)
Paper feed/transport drive board (PFTDB)
Printer control board (PRCB)
Action
Step | Action | Control signal | Location |
---|---|---|---|
1 | Initial check items. | ||
2 | PS4 I/O check, sensor check | PFTDB CN4PFTDB-8 (ON) | P-5 |
3 | CL1 operation check | PFTDB CN4PFTDB-14 (ON) | P-5 |
4 | M22 operation check | PFTDB CN5PFTDB-5 to 8 | P-3 |
5 | Change PFTDB | ||
6 | Change PRCB |