Konica-Minolta bizhub C550

✽ The function tree is shown to comply with the format displayed on the screen.
*1: Settings are available only when the optional fax kit (FK-502) is mounted.
*2: It will be displayed only when the optional fax multi line (ML-501) is mounted.
*3: It will be displayed only when the optional finisher (FS-517/608 or FS-519) is mounted.
*4: It will be displayed only when the optional finisher (FS-519) is mounted.
*5: It will be displayed only when the optional finisher (FS-517/608) is mounted.
*6: It will be displayed only when the optional finisher (FS-608) is mounted.
*7: It will be displayed only when the [Internet ISW Set] is set to “ON.”
*8: It will be displayed only when the optional post inserter (PI-503) is mounted.
*9: It will be displayed only when the optional job separator (JS-504) is mounted.

Service Mode
FAX *1	Line 1 *1		Modem/NCU *1
			NetWork *1
			System *1
			Fax File Format *1
			Communication *1
			List Output *1
			Function Parameter *1
			Initialization *1
	Line 2 *1		Modem/NCU *1
			Network *1
			Communication *1
			Initialization *1
Finisher *3	CB-FN adjustment *4		Fold&Staple Pos. Adjustment *4
			Finisher Check *4
			Punch Regist Loop Size *4
			Punch Horizontal Position *4
	FS-FN adjustment *5		Center Staple Position *6
			Half-Fold Position *6
			Punch Vertical Position *5
			Punch Horizontal Position *5
			Punch edge detection *5
			Punch Resist Loop Size (Body) *5
			Punch Resist Loop Size (PI) *8
			Tri-Fold Position *6
			2 Position Staple Dist. *6
			Cover Sheet Tray Size Detection*8
			Cover Sheet Feeder Adj.*8
			finisher check *5
			Load Data *5
	Staple option setting
	Punch Option setting
	Fold power of pages restrict.
Internet ISW	Internet ISW Set
	HTTP Setting *5
	FTP Setting *5
	Forwarding Access Setting *5
	Download *5