Konica-Minolta bizhub C550

✽ The function tree is shown to comply with the format displayed on the screen.
*1: Settings are available only when the optional fax kit (FK-502) is mounted.
*2: It will be displayed only when the optional fax multi line (ML-501) is mounted.
*3: It will be displayed only when the optional finisher (FS-517/608 or FS-519) is mounted.
*4: It will be displayed only when the optional finisher (FS-519) is mounted.
*5: It will be displayed only when the optional finisher (FS-517/608) is mounted.
*6: It will be displayed only when the optional finisher (FS-608) is mounted.
*7: It will be displayed only when the [Internet ISW Set] is set to “ON.”
*8: It will be displayed only when the optional post inserter (PI-503) is mounted.
*9: It will be displayed only when the optional job separator (JS-504) is mounted.

Service Mode
Imaging Process Adjustment	Gradation Adjust
	Transfer Belt	Cleaning Bias
		Auto Cleaning
	D Max Density
	TCR Level Setting
	Background Voltage Margin
	Transfer Output Fine Adjustment	Primary transfer adj.
		Secondary transfer adj.
	Stabilizer	Stabilization Only
		Initialize+Image Stabilization
	Thick Paper Density Adjustment	Thick 1,1+
		Thick 2,3,4
	Paper separation adjustment
	TCR Toner Supply
	Monochrome Density Adjustment
	Dev. Bias Choice
CS Remote Care
System 1	Marketing Area
	Tel/Fax Number
	Serial Number
	No Sleep
	Foolscap Size Setting
	Original Size Detection
	Install Date
	Initialization	Data Clear
		System Error Clear
	Charging CH cleaning	Cleaning
		Self-Cleaning
	Trouble Isolation
	Post card transfer table
	Change Warm Up Time
	Machine State LED Setting
System 2	HDD
	Image Controller Setting
	Option Board Status
	Consumable Life Reminder
	Unit Change
	Software Switch Setting
	Scan Calibration
	LCC size setting