Konica-Minolta bizhub C368

• When MFP board is replaced, it is necessary to enter the machine type information.
• Refer to the following procedures to enter the machine type information.

Procedure

1. Insert the USB memory to the USB port.
2. Turn the main power switch ON while pressing the Stop key.
3. Touch [Machine Type Select].
4. Enter [Machine] and [Type] information according to the following table. Then touch [Fix].
   

   First four digits of the serial number	A7PU	A7PY	A7R0
   [Machine]	6	6	6
   [Type]	1	2	D

5. Touch [OK], and turn OFF the main power switch.