Konica-Minolta bizhub C360
Service Mode. Function tree 5
✽ The function tree is shown to comply with the format displayed on the screen.
| Service Mode | ||
|---|---|---|
| Finisher *3 | FS-FN adjustment *3 | Center Staple Position *3 |
| Half-Fold Position *3 | ||
| Punch Horizontal Position *3 | ||
| Punch Regist Loop Size *3 | ||
| finisher check *4 | ||
| Load Data *4 | ||
| Alignment Plate Position *5 | ||
| Side position adjustment *3 | ||
| Punch Option setting | ||
| Job Separator *6 | ||
| Internet ISW | Internet ISW Set | |
| HTTP Setting *7 | ||
| FTP Setting *7 | ||
| Forwarding Access Setting *7 | ||
| Download *7 | ||
*1: It will be displayed only when the optional fax kit (FK-502) line 1 is mounted.
*2: It will be displayed only when the optional fax kit (FK-502) line 2 is mounted.
*3: It will be displayed only when the optional finisher (FS-527) is mounted.
*4: It will be displayed only when the optional finisher (FS-527/529) is mounted.
*5: It will be displayed only when the optional finisher (FS-529) is mounted.
*6: It will be displayed only when the optional separator (JS-505) is mounted.
*7: It will be displayed only when the [Internet ISW Set] is set to “ON.”