Konica-Minolta bizhub C360

✽ The function tree is shown to comply with the format displayed on the screen.

Service Mode
System 1	Marketing Area
	Tel/Fax Number
	Serial Number
	No Sleep
	Foolscap Size Setting
	Original Size Detection
	Install Date
	Initialization	Clear All Data
		Clear Individ- ual Data	Copy Program Data
			Address Registration Data
			Fax Setting Data
			All History Data
			Network Setting Data
		System Error Clear
	Trouble Isolation
	Post card transfer table
	Change Warm Up Time
	Machine State LED Setting
System 2	HDD
	Image Controller Setting
	Option Board Status
	Consumable Life Reminder
	Unit Change
	Software Switch Setting
	Scan Calibration
	LCT Paper Size Setting
	Line Mag Setting
	Data Capture
	Split Line Detect. Setting
	Stamp
	Network Fax Settings
	Image Stabilization Setting
	User Paper Settings
	Coverage Rate Screen
	JAM Code Display Setting
	Boot up Screen
	Install Data
	Bluetooth Settings

*1: It will be displayed only when the optional fax kit (FK-502) line 1 is mounted.
*2: It will be displayed only when the optional fax kit (FK-502) line 2 is mounted.
*3: It will be displayed only when the optional finisher (FS-527) is mounted.
*4: It will be displayed only when the optional finisher (FS-527/529) is mounted.
*5: It will be displayed only when the optional finisher (FS-529) is mounted.
*6: It will be displayed only when the optional separator (JS-505) is mounted.
*7: It will be displayed only when the [Internet ISW Set] is set to “ON.”