Konica-Minolta bizhub C360
Service Mode. Function tree 1
✽ The function tree is shown to comply with the format displayed on the screen.
| Service Mode | ||
|---|---|---|
| Machine | Fusing Temperature | |
| Fusing Transport Speed | ||
| Org. Size Detecting Sensor Adj. | ||
| Printer Area | Leading Edge Adjustment | |
| Centering | ||
| Leading Edge Adj. (Duplex Side 2) | ||
| Centering (Duplex 2nd Side) | ||
| Paper Feed Direction Adj. | ||
| Tray Printing Position: Tip | ||
| Scan Area | Image Position: Leading Edge | |
| Image Position: Side Edge | ||
| Cross Direction Adjustment | ||
| Feed Direction Adjustment | ||
| Printer Resist Loop | ||
| Color Registration Adjustment | ||
| Exhaust Fan Stop Delay | ||
| Skew adjustment | Skew adjustment | |
| Skew adjustment reset | ||
| Manual Bypass Tray Adjustment | ||
| Lead Edge Erase Adjustment | ||
| Split Line Prior Detection | ||
| Non-Image Area Erase Check | ||
| Firmware Version | ||
| Imaging Process Adjustment | Gradation Adjust | |
| D Max Density | Copy | |
| Printer | ||
| Background Voltage Margin | ||
| Transfer Output Fine Adjustment | Primary transfer adj. | |
| Secondary transfer adj. | ||
| Stabilizer | Stabilization Only | |
| Initialize+Image Stabilization | ||
| Imaging Process Adjustment | Thick Paper Density Adjustment | |
| Paper separation adjustment | ||
| TCR Toner Supply | ||
| Monochrome Density Adjustment | ||
| Development AC Voltage Choice | ||
| CS Remote Care | ||
*1: It will be displayed only when the optional fax kit (FK-502) line 1 is mounted.
*2: It will be displayed only when the optional fax kit (FK-502) line 2 is mounted.
*3: It will be displayed only when the optional finisher (FS-527) is mounted.
*4: It will be displayed only when the optional finisher (FS-527/529) is mounted.
*5: It will be displayed only when the optional finisher (FS-529) is mounted.
*6: It will be displayed only when the optional separator (JS-505) is mounted.
*7: It will be displayed only when the [Internet ISW Set] is set to “ON.”