Konica-Minolta bizhub C360

CE Password

Use

• To set and change the CE password.
• The CE password needs to be 8 to 64 one-byte alphameric characters and symbols.

Default setting

• 9272927292729272

Procedure

• Enter the CE password (8 digits) on the on-screen keyboard.

1. Current Password: Enter the currently using CE password.
2. New Password: Enter the new CE password.
3. Re-Input Password: Enter the new CE password again.

NOTE

• When the following setting leads to the Password Rules [ON], the password with the same letters as well as the password which is same as the previous one cannot be changed.
  [Administrator Settings] -> [Security Settings] -> [Security Details]
• NEVER forget the CE password. When forgetting the CE password, call responsible person of KMBT.

Administrator Password

Use

• To set and change the administrator password.
• Use this function when the administrator forget the administrator password because a new password can be set without entering the current administrator password with this.
• The administrator password needs to be 8 to 64 one-byte alphameric characters and symbols.

Default setting

• 1234567812345678

Procedure

• Enter the administrator password on the on-screen keyboard.

1. New Password: Enter the new administrator password.
2. Re-Input Password: Enter the new administrator password again.

NOTE

• When the following setting leads to the Password Rules [ON], the password with the same letters, the password which is same as the previous one and the password of less than eight digits cannot be changed. [Administrator Settings] -> [Security Settings] -> [Security Details]