Konica-Minolta bizhub C35P
Troubleshooting. Jam 08. Misfeed at duplex media transport section
Detection timing
Type | Description |
---|---|
Detection of misfeed at duplex media transport section | • The duplex conveyance sensor (PS9) is not blocked even after the lapse of a given period of time after the media has unblocked PS9. |
• The duplex conveyance sensor (PS9) is not unblocked even after the lapse of a given period of time after the media has blocked the exit sensor (PS8). | |
Detection of media left at duplex media transport section | • The duplex conveyance sensor (PS9) is unblocked when the power switch is turned ON, a door or cover is opened and closed, or a misfeed or malfunction is reset. |
Relevant electrical parts
Exit sensor (PS8)
Duplex conveyance sensor (PS9)
Duplex conveyance roller clutch (CL13)
Printer control board (PRCB)
Main motor (M2)
Action
Step | Action | Control signal | Location |
---|---|---|---|
1 | Initial check items. | ||
2 | Check the connector between M2-PRCB PJ11 for proper connection and correct as necessary. | ||
3 | Check the M2 connector for proper drive coupling and correct as necessary. | ||
4 | Check the connector between PS8-PRCB PJ15 for proper connection and correct as necessary. | ||
5 | Check the connector between PS9-PRCB PJ14 for proper connection and correct as necessary. | ||
6 | Check the connector between CL13-relay CN20-PRCB PJ15 for proper connection and correct as necessary. | ||
7 | PS8 sensor check | PRCB PJ15-9 (ON) | H15 |
8 | PS9 sensor check | PRCB PJ14-3 (ON) | B-7 |
9 | CL13 operation check | PRCB PJ15-5 (REM) | C-7 |
10 | M2 operation check | PRCB PJ11-10 to 13 | C-15 |
11 | Change PRCB. |