Konica-Minolta bizhub C35P
Troubleshooting. Jam 06. Misfeed at tray 3 media feed section
Detection timing
Type | Description |
---|---|
Detection of misfeed at tray 3 media feed section | • The media does not unblock the media feed sensor (PS3) even after the lapse of a given period of time after the media feed clutch (CL1) is turned ON. |
Detection of media left in tray 3 media feed section | • The media feed sensor (PS3) is unblocked when the power switch is turned ON, a door or cover is opened and closed, or a misfeed or malfunction is reset. |
Relevant electrical parts
Media feed sensor (PS3)
Media feed clutch (CL1)
Printer control board (PRCB)
PC control board (PCCB)
Media feed motor (M1)
Action
Step | Action | Control signal | Location |
---|---|---|---|
1 | Initial check items. | ||
2 | Check the connector between M1-PCCB PJ3 for proper connection and correct as necessary. | ||
3 | Check the M1 connector for proper drive coupling and correct as necessary. | ||
4 | Check the connector between PS3-PCCB PJ5 for proper connection and correct as necessary. | ||
5 | Check the connector between CL1-relay CN57-PCCB PJ15 for proper connection and correct as necessary. | ||
6 | PS3 sensor check | PCCB PJ5-3 (ON) | I-2 |
7 | CL1 operation check | PCCB PJ5-8 (REM) | I-2 |
8 | M1 operation check | PCCB PJ3-4 to 8 | K-2 |
9 | Check the connector between PCCB PJ1, PJ2-relay CN53, CN70-PRCB PJ25 for proper connection and correct as necessary. | ||
10 | Change PCCB. | ||
11 | Change PRCB. |