Konica-Minolta bizhub C35P
Troubleshooting. Jam 05. Misfeed at tray 2 media feed section
Detection timing
| Type | Description |
|---|---|
| Detection of misfeed at tray 2 media feed section | • The media does not unblock the registration sensor (PS5) even after the lapse of a given period of time after the tray2 media feed clutch (CL1) is turned ON. |
Relevant electrical parts
Registration sensor (PS5)
Tray2 media feed clutch (CL1)
Printer control board (PRCB)
Main motor (M2)
Action
| Step | Action | Control signal | Location |
|---|---|---|---|
| 1 | Initial check items. | ||
| 2 | Check the connector between M2-PRCB PJ11 for proper connection and correct as necessary. | ||
| 3 | Check the M2 connector for proper drive coupling and correct as necessary. | ||
| 4 | Check the connector between PS5-PRCB PJ23 for proper connection and correct as necessary. | ||
| 5 | Check the connector between CL1-PRCB PJ16 for proper connection and correct as necessary. | ||
| 6 | PS5 sensor check | PRCB PJ23-3 (ON) | K-15 |
| 7 | CL1 operation check | PRCB PJ16-2 (REM) | A-7 |
| 8 | M2 operation check | PRCB PJ11-10 to 13 | C-15 |
| 9 | Change PRCB. |