Konica-Minolta bizhub C353P
Service Mode. Function tree 3
NOTE
• Some of these functions can be set or checked only with the jig software. For details, see the function tree of the jig software.
*1: It will be displayed only when the [Internet ISW Set] is set to “ON.”
*2: Unavailable when Data Capture is prohibited on the utility mode
*3: It will be displayed only when the optional finisher is mounted.
| Service Mode | |||
|---|---|---|---|
| MachineAdjust- ment | Print Regist Loop | Bypass | |
| Tray 1 | |||
| Tray 2/3/4 LCT | |||
| Duplex | |||
| Color Reg. | Yellow | ||
| Magenta | |||
| Cyan | |||
| LD Adjust | LD Rad delay Adj | ||
| LD Light balance | |||
| BypassTray Adjust | |||
| Exhaust Fan Delay | |||
| ProcessAdjust- ment | Dmax Density | ||
| TCR Level Setting | |||
| Background Margin | |||
| TransferOutputAdj | 1st Transfer | ||
| 2nd Transfer | |||
| Stabilization | Initialize+Stabi. | ||
| StabilizationOnly | |||
| DensityAdjustment | Thick/Yellow | ||
| Thick/Magenta | |||
| Thick/Cyan | |||
| Thick/Black | |||
| BlackImageDensity | |||
| Replenish Toner | |||
| Bias Choice | |||
| Finisher Adjust *3 |
CB-FN Adjust | Center Staple Pos | |
| Half-Fold Pos. | |||
| Punch Reg. Loop | |||
| PunchStopPosition | |||
| FN-X3 Adjust | Center Staple Pos | ||
| Half-Fold Pos. | |||
| Punch Option | Punch Kit Type | ||
| # of Punch-Holes | |||
| Internet ISW | Internet ISW Set | ||
| HTTP Settings *1 | DataRetrievalSet | ||
| Proxy Connection | |||
| Proxy Server | Server Address | ||
| Port Number | |||
| Proxy Auth. | Auth. Settings | ||
| Auth. Login Name | |||
| Auth. Password | |||
| ConnectionTimeout | |||