Konica-Minolta bizhub C353
Troubleshooting. Jam 07. Misfeed at tray 2 vertical transport section
Detection timing
Type | Description |
---|---|
Detection of misfeed at vertical transport section | • The leading edge of the paper does not turn ON the sensor in front of tim. roller (PS23) even after the lapse of a given period of time after the paper has blocked the paper feed tray 2 vertical transport sensor (PS16). |
• The paper feed tray 2 vertical transport sensor (PS16) is not unblocked even after the lapse of a given period of time after the paper has blocked the PS16. | |
Vertical transport section loop registration reversing jam | • For paper fed from the tray 2, loop forming has not been complete before a sheet enters the timing roller because the rise timing of load to perform registration is earlier than the rise timing of load to form a loop. |
Relevant electrical parts
Transport motor (M1)
Paper feed tray 2 vertical transport clutch (CL3)
Paper feed tray 2 vertical transport sensor (PS16)
Sensor in front of tim. roller (PS23)
Printer control board (PRCB)
Action
Step | Action | Control signal | Location |
---|---|---|---|
1 | Initial check items. | ||
2 | PS16 I/O check, sensor check | PRCB CN9PRCB-11 (ON) | D-10 |
3 | PS23 I/O check, sensor check | PRCB CN1PRCB-3 (ON) | D-18 |
4 | CL3 operation check | PRCB CN9PRCB-17 (ON) | D-11 |
5 | M1 operation check | PRCB CN34PRCB-10 (REM) PRCB CN34PRCB-13 (LOCK) |
D-23 |
6 | Change PRCB |