Konica-Minolta bizhub C353
Troubleshooting. Jam 03. Misfeed at tray 1 feed section
Detection timing
Type | Description |
---|---|
Detection of misfeed at tray 1 feed section | • The leading edge of the paper does not turn ON the sensor in front of tim. roller (PS23) even after the lapse of a given period of time after the tray 1 starts to feed paper. |
Detection of paper left in tray 1 feed section | • The paper feed tray 1 chain feed sensor (PS1) is turned ON when the main power switch is turned ON, a door or cover is opened and closed, or a misfeed or malfunction is reset. |
Tray 1 feed section loop registration reversing jam | • For paper fed from the tray 1, due to a delay in paper arrival, loop forming in front of the timing roller is not complete before the rise timing of the transport motor (M1). |
Tray 1 feed section TOD permit waiting jam | • For paper fed from the tray1, TOD permit continues to be disabled for a predetermined period of time after the timing of TOD output. |
Relevant electrical parts
Transport motor (M1)
Paper feed tray 1 paper feed clutch (CL1)
Paper feed tray 1 chain feed sensor (PS1)
Sensor in front of tim. roller (PS23)
Printer control board (PRCB)
Action
Step | Action | Control signal | Location |
---|---|---|---|
1 | Initial check items. | ||
2 | PS1 I/O check, sensor check | PRCB CN12PRCB-8 (ON) | D-8 |
3 | PS23 I/O check, sensor check | PRCB CN1PRCB-3 (ON) | D-18 |
4 | CL1 operation check | PRCB CN12PRCB-11 (ON) | D-9 |
5 | M1 operation check | PRCB CN34PRCB-10 (REM) PRCB CN34PRCB-13 (LOCK) |
D-23 |
6 | Change PRCB |