Konica-Minolta bizhub C353
Service Mode. Function tree 2
✽ The function tree is shown to comply with the format displayed on the screen.
*1: Settings are available only when the optional fax kit (FK-502) is mounted.
*2: It will be displayed only when the optional fax multi line (ML-501) is mounted.
*3: It will be displayed only when the optional finisher (FS-519) or job separator (JS-505) is
mounted.
*4: It will be displayed only when the optional finisher (FS-519) is mounted.
*5: It will be displayed only when the optional job separator (JS-505) is mounted.
*6: It will be displayed only when the [Internet ISW Set] is set to “ON.”
| Service Mode | ||
|---|---|---|
| Imaging Process Adjustment | Stabilizer | Stabilization Only |
| Initialize+Image Stabilization | ||
| Thick Paper Density Adjustment | ||
| TCR Toner Supply | ||
| Monochrome Density Adjustment | ||
| Dev. Bias Choice | ||
| CS Remote Care | ||
| System 1 | Marketing Area | |
| Tel/Fax Number | ||
| Serial Number | ||
| No Sleep | ||
| Foolscap Size Setting | ||
| Original Size Detection | ||
| Install Date | ||
| Initialization | Data Clear | |
| System Error Clear | ||
| Trouble Isolation | ||
| IU Life Setting | ||
| Change Warm Up Time | ||
| Machine State LED Setting | ||
| System 2 | HDD | |
| Image Controller Setting | ||
| Option Board Status | ||
| Consumable Life Reminder | ||
| Unit Change | ||
| Software Switch Setting | ||
| Scan Calibration | ||
| LCT Paper Size Setting | ||
| Line Mag Setting | ||
| Data Capture | ||
| Split Line Detect. Setting | ||
| Stamp | ||
| Network Fax Settings | ||
| Counter | Life | |
| Jam | ||
| Service Call Counter | ||
| Warning | ||
| Maintenance | ||
| Service Total | ||
| Counter Of Each Mode | ||
| Service Call History (Data) | ||