Konica-Minolta bizhub C353
Service Mode. Function tree 1
✽ The function tree is shown to comply with the format displayed on the screen.
*1: Settings are available only when the optional fax kit (FK-502) is mounted.
*2: It will be displayed only when the optional fax multi line (ML-501) is mounted.
*3: It will be displayed only when the optional finisher (FS-519) or job separator (JS-505) is
mounted.
*4: It will be displayed only when the optional finisher (FS-519) is mounted.
*5: It will be displayed only when the optional job separator (JS-505) is mounted.
*6: It will be displayed only when the [Internet ISW Set] is set to “ON.”
| Service Mode | ||
|---|---|---|
| Machine | Fusing Temperature | |
| Fusing Transport Speed | ||
| Org. Size Detecting Sensor Adj. | ||
| Printer Area | Leading Edge Adjustment | |
| Centering | ||
| Leading Edge Adj. (Duplex Side 2) | ||
| Centering (Duplex 2nd Side) | ||
| Paper Feed Direction Adj. | ||
| Scan Area | Image Position: Leading Edge | |
| Image Position: Side Edge | ||
| Cross Direction Adjustment | ||
| Feed Direction Adjustment | ||
| Printer Resist Loop | ||
| Color Registration Adjustment | Cyan | |
| Magenta | ||
| Yellow | ||
| Exhaust Fan Stop Delay | ||
| LD adjustment | LD delay adjust. | |
| LD lightness balance adjust. | ||
| Manual Bypass Tray Adjustment | ||
| Lead Edge Erase Adjustment | ||
| Split Line Prior Detection | ||
| Firmware Version | ||
| Imaging Process Adjustment | Gradation Adjust | |
| D Max Density | ||
| TCR Level Setting | ||
| Background Voltage Margin | ||
| Transfer Output Fine Adjustment | Primary transfer adj. | |
| Secondary transfer adj. | ||