Konica-Minolta bizhub C351
Troubleshooting. Jam 05. Tray 3 Take-up and Vertical Transport Misfeed (PC-102/PC202)
Detection timing
Type | Description |
---|---|
Misfeed detected at Tray 3 take-up or Vertical Transport Section | The leading edge of the paper does not block the Tray 3 Vertical Transport Sensor (PC117-PF) even after the lapse of a given period of time after the Tray 3 Paper Feed Motor has been energized. |
The Tray 2 Vertical Transport Sensor (PC108) is not blocked even after the lapse of a given period of time after the paper has blocked the Tray 3 Vertical Transport Sensor (PC117-PF). | |
Paper left at Tray 3 | The Tray 3 Vertical Transport Sensor (PC117-PF) is blocked when the Main Power Switch is turned ON, a door or cover is opened and closed, or a misfeed or malfunction is reset. |
The Tray 3 Paper Take-Up Sensor (PC116-PF) is blocked when the Main Power Switch is turned ON, a door or cover is opened and closed, or a misfeed or malfunction is reset. | |
Misfeed detected as a result of delayed deactivation of sensor | The Tray 3 Vertical Transport Sensor (PC117-PF) is not unblocked even after the lapse of a given period of time after it has been blocked by the paper. |
Relevant electrical parts
Tray 3 Paper Take-Up Sensor (PC116-PF)
Tray 3 Vertical Transport Sensor (PC117-PF)
Tray 2 Vertical Transport Sensor (PC108)
Tray 3 Paper Feed Motor (M122-PF)
Main Control Board (PWB-C2 PF)
Action
Step | Action | Control signal | Location |
---|---|---|---|
1 | Initial check items. | ||
2 | PC116-PF I/O check, Sensor check | PWB-C2 PF PJ6C2PF-8 (ON) | PC-202 C-4 |
3 | PC117-PF I/O check, Sensor check | PWB-C2 PF PJ6C2PF-11 (ON | PC-202 C-4 |
4 | PC108 I/O check, Sensor check | PWB-Z PJ6Z-11 (ON) | T to U-27 |
5 | M122-PF operation check | PWB-C2 PF PJ5C2PF-1 to 4 | PC-202 C-4 |
6 | Change PWB-C2 PF |