Konica-Minolta bizhub C350
Service Mode. Counter Settings 2
Jam
Functions
• To check the number of misfeeds that have occurred at different locations in the machine.
• To clear the count of each counter.
Use
• To check the number of paper misfeeds that have occurred
Setting/ Procedure
• To clear the count of a counter, select the specific part and press the Clear key.
• If a counter is cleared mistakenly, press the Interrupt key, which will undo the clearing operation.
Trouble
Functions
• To check the number of malfunctions that have occurred at different locations in the machine
• To clear the count of each counter.
Use
• To check the number of malfunctions that have occurred
Setting/ Procedure
• To clear the count of a counter, select the specific part and press the Clear key.
• If a counter is cleared mistakenly, press the Interrupt key, which will undo the clearing operation.
Warning
Functions
• To check the number of warning conditions detected according to the warming type
• To clear the count of each counter.
Use
• To check the number of warning conditions that have been detected
Setting/ Procedure
• To clear the count of a counter, select the specific part and press the Clear key.
• If a counter is cleared mistakenly, press the Interrupt key, which will undo the clearing operation.
• When a warning condition occurs, an oil mark appears at the lower left corner of the Basic screen.
• Touching the oil mark will display the warning code screen.
Maintenance
Functions
• To set a count value for maintenance of any given part.
Use
• When any given part is replaced.
Setting/ Procedure
Maint.-Set
• Enter the maintenance counter value from the 10-Key Pad.
Maint.-Count
• Counts up when a sheet of paper is fed through the machine.
• Pressing the Clear key will clear the count.
• If the count is cleared mistakenly, press the Interrupt key, which will undo the clearing operation.