Konica-Minolta bizhub C350
Service Mode. Counter Settings 1
• The Counter displays the counts of various counters to allow the Tech. Rep. to check or set as necessary.
Procedure
- Touch “Counter” to show the Counter menu
- Select the specific counter to be displayed.
- To clear the counts of two or more counters within a group or across different groups at once, touch “Counter Reset,” select the specific counters to be cleared, and touch “END.” Two or more counters can be selected.
Life
Functions
• To check the number of hours or times each of the different maintenance parts has been used.
• To clear the count of each counter.
Use
• When each of the maintenance parts is replaced.
Setting/ Procedure
- To clear the count of a counter, select the specific part and press the Clear key.
- If a counter is cleared mistakenly, press the Interrupt key, which will undo the clearing operation.
- It is not possible to clear the count of the counters for the Fusing Unit, Transfer Belt Unit, and IU, which are provided with a new unit detection function.
1
- Fusing Unit: Number of times a sheet of paper is fed through
- Transfer Roller Unit: Number of times a sheet of paper is fed through
- Transfer Belt Unit: Number of times a sheet of paper is fed through
- Paper Powder Filter/Ozone Filter: Number of times a sheet of paper is fed through
- 1st.: Number of sheets of paper fed from Tray1
- 2nd.: Number of sheets of paper fed from Tray2
- 3rd.: Number of sheets of paper fed from Tray3
- 4th.: Number of sheets of paper fed from Tray4
- Manual Bypass : Number of sheets of paper fed from the Bypass
2
- Cyan IU: Period of time over which the Cyan Developing Unit has been used.
- Magenta IU: Period of time over which the Magenta Developing Unit has been used.
- Yellow IU: Period of time over which the Yellow Developing Unit has been used.
- Black IU: Period of time over which the Black Developing Unit has been used.
- LCT Parts: Number of sheets of paper fed from the LCT
- ADF Feed: Number of sheets of paper fed through the take-up section of the ADF
- ADF Rev.: Number of sheets of paper fed through the turnover unit of the ADF
- Sorter/Finisher: Number of sheets of paper fed out of the Sorter/Finisher
- Staple: Number of stapling sequences performed
- Punch: Number of hole-punch sequences performed
- Paper Fold: Number of folding sequences performed