Konica-Minolta bizhub C350
Service Mode 01. How to Enter
Procedure
- Press the Utility key.
- Touch “Counter List.”
- Press the following keys in this order.
Stop → 0 → 0 → Stop → 0 → 1 - Enter the 8-digit service code and touch “Enter.” (The default value is “00000000.”)
NOTES
• The service code entered is displayed as “✽.”
• If a wrong service code is entered, touch “Enter” to go back to the Basic screen.
• When access is attempted a fourth time after a wrong service code has been entered three times, the “Enter” will not be displayed. In this case, the Power Switch must be turned OFF and ON.
• When the access to the Tech. Rep. mode is successfully made with the correct service code entered, the machine clears the count of illegal access to the Tech. Rep. mode. - The Tech. Rep. Mode menu will appear.
NOTES
• Be sure to change the service code from its default value.
• For the procedure to change the service code, see the Security Mode.
Exiting
• Touch the “Fin. Time” key.
Changing the Setting Value in Tech. Rep. Mode Functions
- Use the ID key to change the + sign to - sign, or vice versa.
- Use the Up/Down key to enter or change the setting value.
- Use the 10-Key Pad to enter the setting value. (To change the setting value, first press the Clear key before making an entry.)