Konica-Minolta bizhub C35
Troubleshooting. Jam 04. Misfeed at tray 1 paper feed section
Detection timing
| Type | Description |
|---|---|
| Detection of tray 1 paper feed section | • The paper does not unblock the registration sensor (PS5) even after the lapse of a given period of time after the tray1 media feed clutch (CL2) is turned ON. |
Relevant electrical parts
Registration sensor (PS5)
Tray1 media feed clutch (CL2)
Printer control board (PRCB)
Main motor (M2)
Action
| Step | Action | Control signal | Location |
|---|---|---|---|
| 1 | Initial check items. | ||
| 2 | Check the connector between M2-PRCB PJ6 for proper connection and correct as necessary. | ||
| 3 | Check the M2 connector for proper drive coupling and correct as necessary. | ||
| 4 | Check the connector between PS5-PRCB PJ27 for proper connection and correct as necessary. | ||
| 5 | Check the connector between CL2-PRCB PJ11 for proper connection and correct as necessary. | ||
| 6 | PS5 sensor check | PRCB PJ27-7 (ON) | E-15 |
| 7 | CL2 operation check | PRCB PJ11-7 (REM) | K-15 |
| 8 | M2 operation check | PRCB PJ6-3 to 6 | C-15 |
| 9 | Change PRCB. |