Konica-Minolta bizhub C3320i

Rewriting of Firmware

Methods for rewriting the firmware are shown below.

NOTE
▪ The settings in the "Utility" mode and the "Service Mode" will not be changed, when the firmware is rewritten.

<How to use a USB memory>
Save the firmware data to a USB memory. Connect the USB to the main body directly and update the firmware.

<How to use an Internet ISW>
“Internet ISW” is a system, which obtains firmware from the program server via the Internet to update the firmware.
It is executed when a firmware update instruction is issued or at a predetermined time.

<How to use an Auto Update setting>
"Auto Update" is the function, which makes the main body access the program server periodically through the network to obtain a new firmware data, then rewrites it automatically.
It is also possible to share the update data obtained from the network with other MFP, and operate the MFP as a program server for “the Auto Update function.”

Other data

Activate all data such as the voice data, and the loadable device driver as required in accordance with the rewriting firmware or user's environment.

Data	How to install
All data	[Service Mode] -> [System 2] -> [Install Data]
Loadable device driver	[Service Mode] -> [System 2] -> [Driver Install]

Confirming the firmware version

After conducting firmware rewriting, check the firmware version No. and confirm that the firmware has been normally updated.

Procedure

1. Select [Service Mode] -> [Firmware Version].
2. To check the firmware version.