Konica-Minolta bizhub C3110
Troubleshooting. Jam 07. Jam at tray2 vertical conveyance section
Detection timing
JAM type | Detection timing |
---|---|
Detection of jam at tray2 vertical section | • The paper does not unblock the registration sensor (PS5) even after the lapse of a given period of time after the paper has unblocked the tray2 paper feed sensor (PS3). |
• The paper does not block the tray2 paper feed sensor (PS3) even after the lapse of a given period of time after the paper has unblocked the tray2 paper feed sensor (PS3). |
Relevant electrical parts
• Tray2 paper feed sensor (PS3)
• Tray2 paper feed clutch (CL1)
• Registration sensor (PS5)
• Printer control board (PRCB)
• PC control board (PCCB)
• Tray2 paper feed motor (M1)
Action
Step | Action | Control signal | Location |
---|---|---|---|
1 | Initial check items | ||
2 | Check the connector between M1-PCCB PJ3 for proper connection and correct as necessary. | ||
3 | Check the M1 connector for proper drive coupling and correct as necessary. | ||
4 | Check the connector between PS5-PRCB CN23 for proper connection and correct as necessary. | ||
5 | Check the connector between PS3-PCCB PJ5 for proper connection and correct as necessary. | ||
6 | Check the connector between CL1-relay CN57-PCCB PJ15 for proper connection and correct as necessary. | ||
7 | Check the connector between PCCB PJ1-relay CN53- PRCB CN25 for proper connection and correct as necessary. | ||
8 | PS3 sensor check | PCCB PJ5-3 (ON) | 2-H to I |
9 | PS5 sensor check | PRCB CN23-3 (ON) | 15-L |
10 | CL1 operation check | PCCB PJ5-8 (REM) | 2-I |