Konica-Minolta bizhub C308
Firmware 1. Overview
• There are two ways to update the firmware: One is by directly connecting with the main body using the USB memory device, and the other is by downloading over a network using the Internet ISW.
NOTE
- The settings in the "Utility" mode and the "Service Mode" will not be changed, when the firmware is updated.
- Activate the loadable device driver and voice data as required in accordance with the rewriting firmware or user's environment.
1. [Service Mode] -> [System 2] -> [Install Data]
2. Turn OFF and ON the main power switch and sub-power switch.
3. Upgrade the printer driver version.
Confirming the firmware version
Procedure
- Call the Service Mode to the screen.
- Select the [Firmware Version].
- Check the current firmware version.
NOTE
• After conducting firmware updating, check the firmware version No. and confirm that the firmware has been normally updated.