Konica-Minolta bizhub C200e
Troubleshooting. Jam 05. Misfeed at exit section
Detection timing
Type | Description |
---|---|
Detection of misfeed at exit section | • The paper exit sensor (PS2) is not turned OFF even after the lapse of a given period of time after the paper has turned ON the PS2. |
• The paper exit sensor (PS2) is not turned ON even after the lapse of a given period of time after the switchback sequence is started. | |
• The duplex paper passage sensor/1 is not turned ON even after the lapse of a given period of time after the switchback sequence is started. | |
Detection of paper left in exit section | • The paper exit sensor (PS2) is turned ON when the main power switch is turned ON, a door or cover is opened and closed, or a misfeed or malfunction is reset. |
Relevant electrical parts
Transport motor (M1)
Fusing motor (M2)
Duplex unit transport motor (M2)
Paper exit sensor (PS2)
Duplex paper passage sensor/1
Printer control board (PRCB)
Action
Step | Action | Control signal | Location |
---|---|---|---|
1 | Initial check items. | ||
2 | PS2 I/O check, sensor check | ||
3 | Duplex paper passage sensor/1 I/O check, sensor check | E-3 (AD-505) | |
4 | M1 operation check | PRCB CN27-14 (REM) PRCB CN28-2 (LOCK) |
C to D-23 |
5 | Fusing motor (M2) operation check | PRCB CN27-4 (REM) PRCB CN27-7 (LOCK) |
C to D-22 |
6 | Duplex unit transport motor (M2) operation check | DCB CN4-1 to 4 | F-5 (AD-505) |
7 | Change PRCB |