Konica-Minolta bizhub C200
Troubleshooting. Jam 06. Controller jam
Detection timing
| Type | Description |
|---|---|
| Controller jam | • A control erratic operation as it relates to the duplex unit occurs. |
| • A stop command (a command to effect a forced stop) is received. | |
| • A media error (wrong type or size of paper) occurs during a 2-sided print cycle. |
Relevant electrical parts
MFBU board (MFBUB)
Printer control board (PRCB)
Action
| Step | Action | Control signal | Location |
|---|---|---|---|
| 1 | Initial check items. | ||
| 2 | Check for the paper left in the machine. | ||
| 3 | Check to see if the size or type of the paper specified on the control panel or printer driver coincides with that of the paper actually loaded. | ||
| 4 | One possible cause is a control erratic operation. So, turn OFF and ON the main power switch and run the print cycle again. | ||
| 5 | Upgrade the firmware. | ||
| 6 | Change PRCB | ||
| 7 | Change MFBUB |