Konica-Minolta bizhub C200

CE Password

Functions

• To set and change the CE password.

Use

• Use to change the CE password.

Setting/ Procedure

• Enter the CE password (8 digits) on the on-screen keyboard.
• The initial setting is “92729272.”
  Current Password : Enter the currently using CE password.
  New Password : Enter the new CE password.
  Re-Input Password : Enter the new CE password again.

NOTE
• NEVER forget the CE password. When forgetting the CE password, it becomes necessary to replace the RAMU board with a new one and call responsible person of KMBT.

CE Authentication

Functions

• To determine whether or not to authenticate CE password as entering Service Mode.

Use

• Use when authenticating CE password as entering Service Mode.

Setting/ Procedure

• The default setting is OFF.

Administrator Password

Functions

• To set and change the administrator password.

Use

• Use to change the administrator password.
• Use this function when the administrator forget the administrator password because a new password can be set without entering the current administrator password with this.

Setting/ Procedure

• Enter the administrator password (8 digits) on the on-screen keyboard.
• The initial setting is “12345678.”
  New Password : Enter the new administrator password.
  Re-Input Password : Enter the new administrator password again.