Konica-Minolta bizhub C200
Service Mode 01. How to Enter
Procedure
- Press the Utility/Counter key.
- Touch [Check Details].
- Press the following keys in this order; Stop → 0 → 0 → Stop → 0 → 1
NOTE
• When selecting [CE Authentication] under [Security Settings] available from Service Mode, authentication by CE password is necessary. Enter the 8 digits CE password, and touch [END].
(The initial setting for CE password is “92729272.”)
• NEVER forget the CE password. When forgetting the CE password, it becomes necessary to replace the RAMU board with a new one and call responsible person of KMBT.
• The service code entered is displayed as “✽.” - The Service Mode menu will appear.
NOTE
• Be sure to change the CE password from its default value.
• For the procedure to change the CE password, see the Security Settings.
Exiting
• Touch the [OK] key.
NOTE
• When changing the setting value in service mode, make sure to turn main power switch off once and turn it on again.
Changing the setting value in Service Mode functions
- Use the [+] / [-] key to enter or change the setting value.
- Use the 10-key pad to enter the setting value. (To change the setting value, first press the Clear key before making an entry.)