Konica-Minolta bizhub C20
Troubleshooting. Jam 04. Misfeed at transfer section
Detection timing
Type | Description |
---|---|
Detection of misfeed at transfer section | The registration sensor (PS4) is not blocked even after the lapse of a given period of time after the paper has unblocked PS4. |
The paper does not block the exit sensor/1 (PS8) even after the lapse of a given period of time after the paper has unblocked the registration sensor (PS4). | |
When a sheet of paper is passing through the registration sensor (PS4), the pressure sequence of the 2nd transfer section has not started. | |
Detection of paper left in transfer section | The registration sensor (PS4) is unblocked when the power switch is turned ON, a door or cover is opened and closed, or a misfeed or malfunction is reset. |
The media loop sensor (PS6) is unblocked when the power switch is turned ON, a door or cover is opened and closed, or a misfeed or malfunction is reset. |
Relevant electrical parts
Registration sensor (PS4)
Exit sensor/1 (PS8)
Media loop sensor (PS6)
2nd image transfer pressure/retraction clutch (CL5)
Print control board (PRCB)
Action
Step | Action | Control signal | Location |
---|---|---|---|
1 | Initial check items. | ||
2 | PS4 sensor check | PRCB PJ15-3 (ON) | C to D-5 |
3 | Make the sensor check of exit sensor/1 (PS8) and, if any abnormal condition is found, replace the fuser unit with a new one. | ||
4 | PS6 sensor check | PRCB PJ16-3 (ON) | C to D-4 |
5 | CL5 operation check | PRCB PJ10-5 (REM) | C to D-7 to 8 |
6 | Change PRCB. |