Konica-Minolta bizhub C20
Troubleshooting. Jam 03. Misfeed at fusing section
Detection timing
Type | Description |
---|---|
Detection of misfeed at fusing section | The exit sensor/1 (PS8) is not unblocked even after the lapse of a given period of time after the paper has blocked the exit sensor/1 (PS8) |
The duplex transport sensor (PS26) is not unblocked even after the lapse of a given period of time after the paper has blocked the exit sensor/1 (PS8) during paper take-up from the duplex unit. | |
Detection of paper left in fusing section | The exit sensor/1 (PS8) is blocked when the power switch is turned ON, a door or cover is opened and closed, or a misfeed or malfunction is reset. |
Relevant electrical parts
Exit sensor/1 (PS8)
Duplex transport sensor (PS26)
Print control board (PRCB)
Action
Step | Action | Control signal | Location |
---|---|---|---|
1 | Initial check items. | ||
2 | Make the sensor check of exit sensor/1 (PS8) and, if any abnormal condition is found, replace the fuser unit with a new one. | ||
3 | PS26 sensor check | PRCB PJ27-3 (ON) | C to D-3 |
4 | Change PRCB. |