Konica-Minolta bizhub 951 Pro

Start method

You can access the service mode while the power is both turned ON and OFF. In either way, the started service mode is the same, but how to exit differs.

NOTE

• Ensure appropriate security for Service Mode function setting procedures. They should NEVER be shown to any unauthorized person not involved with service jobs.
• If you leave the site with the Service Mode setting screen being displayed, unauthorized changes could occur for any set values. When you finish the setting of Service Mode, or if you have to leave the site by necessity when the Service Mode has been set, be sure to press [Exit] to the basic screen.

(1) Start-up from power ON

1. Be sure that the ordinary operation screen *1 is displayed. Press
   [Utility/Counter] button.
2. "Utility screen" On the Operation panel, press the following buttons.
   Stop→0→0→Stop→0→1
   When the CE password has been set, entering the password is required to enter the service mode.
3. "Service Mode Menu screen" The service mode appears.
   *1 Default is [MACHINE] screen.

(2) Start-up from power OFF

1. While pressing [Utility/Counter] button, turn ON the sub power switch (SW2). When the CE password has been set, entering the password is required to enter the service mode.
2. "Service Mode Menu screen" The service mode appears.

Exit method

Exit methods differ according to the condition of power switch, ON or OFF.

(1) When the power is ON

1. "Service Mode menu screen" Press [Exit] to back to "Utility screen".
2. The new settings become effective.

(2) When the power is OFF

1. "Service Mode Menu screen" Turn OFF the SW2.
2. After the reboot, the new settings become effective.