Konica-Minolta bizhub 7718
Maintenance. Periodical replacement parts list
- To ensure that the machine produces good copies and to extend its service life, it is recommended that the maintenance jobs described in this schedule be carried out as instructed.
- Replace with reference to the numeric values displayed on the total counter, the life counter or the messages displayed on the control panel.
- Maintenance conditions are based on the case of A4 or 8 1/2 x 11, standard mode* and low power mode OFF.
Main body
Classification | Parts name | Parts No. | Replacing cycle |
---|---|---|---|
Processing section | Developer | — | 55,000 |
Drum | — | 55,000 | |
Cleaning blade | A0XX 3618 ## | 55,000 | |
Drum charge corona assy | A1XU R701 ## | 55,000 | |
Toner bottle (TN117) | — | 5,000 | |
Toner bottle (TN116) Toner bottle (TN117H) *1 |
— | 11,000 | |
Fusing section | Fusing unit 220V - 240V *2 | A0XX PP6X ## | 100,000 |
Fusing unit 110V *2 | A0XX PP6Y ## | 100,000 | |
Fusing unit 120V - 127V *2 | A0XX PP70 ## | 100,000 |
*1: Only for China
*2: Actual durable cycle (PM counter value)
Periodical cleaning parts list
Clean with reference to the numeric values displayed on the total counter, the life counter or the messages displayed on the control panel.
Classification | Parts name | Cleaning cycle |
---|---|---|
Processing section | Ds collars | 55,000 |
Developer scattering prevention plate | 55,000 | |
Drum separator fingers | 55,000 | |
Conveyance section | Timing roller | 55,000 |
Pre-image transfer guide plate | 55,000 |