Konica-Minolta bizhub 7718
Maintenance. Concept of periodical maintenance
The cleaning or replacement cycle of the parts of the machine and options that need periodical maintenance depends on the total counter value or each counter value provided by [SERVICE MODE] - [COUNTER] - [PM COUNTER].
Main body
A. Periodical maintenance 1 (Total counter; every 55,000 counts)
Section | Description | Clean | Check | Replace |
---|---|---|---|---|
Overall | Paper feed and image conditions | ● | ||
Appearance | ● | ● | ||
Conveyance section | Timing roller | ● | ||
Pre-image transfer guide plate | ● | |||
Processing section | Ds collars | ● | ||
Developer scattering prevention plate | ● | |||
Drum separator fingers | ● | |||
Developer | ● | |||
Drum | ● | |||
Cleaning blade | ● | |||
Drum charge corona assy | ● |
B. Periodical maintenance 2 (PM counter; every 100,000 counts)
Section | Description | Clean | Check | Replace |
---|---|---|---|---|
Fusing section | Fusing unit | ● |