Konica-Minolta bizhub 7616v
Troubleshooting. Jam 5. Misfeed at the fusing/exit section
Detection timing
| Type | Description |
|---|---|
| Fusing/exit section misfeed detection | • The exit paper sensor (PS3) is not unblocked even after the lapse of a given period of time after the registration sensor (PS1) has been blocked. |
| Paper left at the fusing/exit section | • The exit paper sensor (PS3) is blocked at timing when the power switch is turned ON, the cover is opened and closed, or a paper misfeed or malfunction is reset. |
Relevant electrical parts
Registration sensor (PS1)
Exit paper sensor (PS3)
Printer control board (PRCB)
| Step | Action | Control signal | Location |
|---|---|---|---|
| 1 | Initial checks | ||
| 2 | PS1 sensor check | PRCB PJ17PRCB-3 (ON) | C-5 |
| 3 | PS3 sensor check | PRCB PJ15PRCB-3 (ON) | C-18 |
| 4 | Replace PRCB |