Konica-Minolta bizhub 7616v
Troubleshooting. Jam 2. Misfeed at tray1 paper feed section
Detection timing
| Type | Description |
|---|---|
| Tray1 paper feed section misfeed detection | • The leading edge of the paper does not unblock the registration sensor (PS1) even after the lapse of a given period of time after the paper feed solenoid/1 (SD1) has been energized. |
| Size error detection | • The registration sensor (PS1) is not blocked even after the lapse of a given period of time after the paper has unblocked the PS1. |
| • The registration sensor (PS1) is blocked before the lapse of a given period of time. |
Relevant electrical parts
Registration sensor (PS1)
Paper feed solenoid/1 (SD1)
Printer control board (PRCB)
| Step | Action | Control signal | Location |
|---|---|---|---|
| 1 | Initial checks | ||
| 2 | PS1 sensor check | PRCB PJ17PRCB-3 (ON) | C-5 |
| 3 | SD1 operation check | PRCB PJ9PRCB-2 (REM) | C-14 |
| 4 | Replace PRCB |