Konica-Minolta bizhub 7616v
Service Mode. Function tree 2
DISPLAY
TONER DENSITY LEVEL
PROCESS CONTROL
MAIN F/W VER.
ENGINE F/W VER.
PCL F/W VER. *5
NIC F/W VER. *6
ADF F/W VER. *4
MAIN RAM SIZE
SERIAL NO.
CUSTOMER ID
FUNCTION
PAPER FEED TEST
PROCESS CHECK
ATDC AUTO ADJUST
PRN TEST PATTERN
ADF FEED TEST *3
COPY ADF GLASS
CCD MOVE TO HOME
UPLOAD F/W
FAX RES. COPY TEST *1
SCAN TEST
ADF WIDTH Ad. (Max) *3
ADF WIDTH Ad. (Min) *3
ADF SENSOR ADJUST *4
SOFT SWITCH *1
REPORT *1
SERVICE DATA LIST *1
ERROR CODE LIST *1
T.30 PROTOCOL LIST *1
ADMIN. REGISTRATION
FIXED ZOOM CHANGE
FACTORY TEST
SIGNAL TEST *1
RELAY TEST *1
DIAL TEST *1
VOLUME TEST *1
PANEL BUZZER TEST
RAM TEST
CLEAR DATA
DRAM CLEAR *1
FLASH ROM CLEAR *1
MEMORY CLEAR
PM COUNTER
MAINTENANCE COUNT
SUPPLIES LIFE COUNT.
APPLICATION COUNTER
SCAN COUNTER
PAPER SIZE COUNTER
MISFEED COUNTER
TROUBLE COUNTER
ADF BACKUP CLEAR *4
*1: It will be displayed only when the FK-506 is mounted.
*2: It will be displayed only when the AD-504 is mounted. (bizhub 211/220 only)
*3: It will be displayed only when the DF-502 or DF-605 is mounted.
*4: It will be displayed only when the DF-605 is mounted.
*5: It will be displayed only when the IC-206 is mounted.
*6: It will be displayed only when the NC-503 is mounted.