Konica-Minolta bizhub 7616v

SERVICE’S CHOICE

MARKETING AREA *1
SHIPMENT
MAINTENANCE COUNT.
IU LIFT STOP MODE
ID ADJUST
VG ADJUST
FUSER TEMP. (PLAIN)
FUSER TEMP. (THICK)
FUSER TEMP. (OHP)
LEADING EDGE
TRAILING EDGE
VERTICAL EDGE
LOOP Ad. (TRAY1)
LOOP Ad. (TRAY2-5)
LOOP Ad. (DUPLEX) *2
LOOP Ad. (BYPASS)
FLS PAPER SIZE
FLS/LEGAL CHANGE
TX SPEED *1
RX SPEED *1
TX LEVEL *1
RX LEVEL *1
DTMF LEVEL *1
CNG LEVEL *1
CED LEVEL *1
ECM MODE *1
CODING SCHEME *1
REPORT DESTINATION *1
TONER EMPTY REPORT *1
IU LIFE REPORT *1
MAINTENANCE REPORT *1
PROTOCOL REPORT *1
CCD APS SIZE
GDI TIMEOUT

ADJUST

PRN MAIN REGIST
PRN SUB REGIST
CCD MAIN ZOOM
CCD SUB ZOOM
CCD MAIN REGIST
CCD SUB REGIST
ADF SUB ZOOM *3
ADF MAIN REGIST *3
ADF SUB REGIST 1 *3
ADF SUB REGIST 2 *4
ADF REG. LOOP 1 *3
ADF REG. LOOP 2 *4
ATDC GAIN
MODEL SETTING

COUNTER

TOTAL COUNTER
SIZE COUNTER
PM COUNTER
MAINTENANCE COUNT.
SUPPLIES COUNTER
APPLICATION COUNT.
SCAN COUNTER
PAPER SIZE COUNTER
MISFEED COUNTER
TROUBLE COUNTER

*1: It will be displayed only when the FK-506 is mounted.
*2: It will be displayed only when the AD-504 is mounted. (bizhub 211/220 only)
*3: It will be displayed only when the DF-502 or DF-605 is mounted.
*4: It will be displayed only when the DF-605 is mounted.
*5: It will be displayed only when the IC-206 is mounted.
*6: It will be displayed only when the NC-503 is mounted.