Konica-Minolta bizhub 5020i

This function is performed to reset the counter for each consumable part in the main PCB after that has been replaced.

Operating Procedure bizhub 4000i

1. Press the [▲] or [▼] key in the initial state of maintenance mode to display "MAINTENANCE 88" on the LCD, and press the [OK] key. "Reset-Laser Unit" is displayed on the LCD.
2. Press the [▲] or [▼] key to display the part with the counter to be reset on the LCD, and press the [OK] key.
3. "*******OK?" is displayed on the LCD. Press the [OK] key to reset the counter for the selected part and return the display to the procedure (2). (******* represents the name of the selected part)
4. Press the [X] key, and the machine returns to the initial state of maintenance mode.

Operating Procedure bizhub 4000i

1. Press the [8] key twice in the initial state of maintenance mode. "Reset- Laser Unit" is displayed on the LCD.
2. Press the [▲] or [▼] key to display the part with the counter to be reset on the LCD, and press the [Mono] key.
3. "*******OK?" is displayed on the LCD. Press the [Mono] key to reset the counter for the selected part and return the display to the procedure (2). (******* represents the name of the selected part)
4. Press the [X] key, and the machine returns to the initial state of maintenance mode.

Selectable parts are shown in the table below.

LCD	Part name	Counter to be reset
Reset-Laser Unit	Laser unit	Printed pages counter
Reset-Fuser Unit	Fuser unit	Printed pages counter
Reset-PF Kit T1	PF kit 1	Printed pages counter
Reset-PF Kit T2	PF kit 2	Printed pages counter
Reset-PF Kit T3	PF kit 3	Printed pages counter
Reset-PF Kit T4	PF kit 4	Printed pages counter
Reset-PF Kit MP	PF kit MP	Printed pages counter
Reset-LVPS	Low-voltage power supply PCB ASSY	Irregular power supply detection counte