Konica-Minolta bizhub 502

12. FAX *1

Line 1 *1	Modem/NCU *1
	Network *1
	System *1
	Fax File Format *1
	Communication *1
	List Output *1
	Function Parameter *1
	Initialization *1
Line 2 *2	Modem/NCU *2
	Network *2
	Communication *2
	Initialization *2

13. Finisher *3

FS-FN adjustment *3	Center Staple Position *3
	Half-Fold Position *4 *5
	Punch Centering Fine Adj *8
	Punch Edge Adj *9
	Punch F. Sensor Intensity Adj. *8
	Punch vertical position (Z-fold) *7
	Punch horizontal position (Z-fold) *7
	Punch regist adj. (Z-fold) *7
	Punch Registration Loop Adj *10
	Punch Resist Loop Size (PI) *6 *8
	1st Z-Fold position *7
	2nd Z-Fold position *7
	Tri-Fold Position *4
	Center-Staple Pitch Adj. *4 *5
	PI Size Detection *6
	Post Inserter Adjustment *6
	Finisher Components Test Mode *3
	Load Data *3
	Paper Alignment Guides W. Adj. *4 *5
	Punch unit edge detection *7
Max Staple Limit Setting
Punch Option setting
Max. # of Folded Sheets Setting

14. Internet ISW

Internet ISW Set
HTTP Setting *10
FTP Setting *10
Forwarding Access Setting *10
Download *10

*1: It will be displayed only when the optional fax kit (FK-502) line 1 is mounted.
*2: It will be displayed only when the optional fax kit (FK-502) line 2 is mounted.
*3: It will be displayed only when the optional finisher (FS-526 or FS-527) is mounted.
*4: It will be displayed only when the optional saddle stitcher (SD-508) is mounted.
*5: It will be displayed only when the optional saddle stitcher (SD-509) is mounted.
*6: It will be displayed only when the optional post inserter (PI-505) is mounted.
*7: It will be displayed only when the optional Z folding unit (ZU-606) is mounted.
*8: It will be displayed only when the optional punch kit (PK-516) is mounted.
*9: It will be displayed only when the optional punch kit (PK-516 or PK-517) is mounted.
*10: It will be displayed only when the [Internet ISW Set] is set to “ON.”