Konica-Minolta bizhub 5000i
Maintenance Mode. Function code 88. Reset counters for consumable parts
This function is performed to reset the counter for each consumable part in the main PCB after that has been replaced.
Operating Procedure bizhub 4000i
- Press the [▲] or [▼] key in the initial state of maintenance mode to display "MAINTENANCE 88" on the LCD, and press the [OK] key. "Reset-Laser Unit" is displayed on the LCD.
- Press the [▲] or [▼] key to display the part with the counter to be reset on the LCD, and press the [OK] key.
- "*******OK?" is displayed on the LCD. Press the [OK] key to reset the counter for the selected part and return the display to the procedure (2). (******* represents the name of the selected part)
- Press the [X] key, and the machine returns to the initial state of maintenance mode.
Operating Procedure bizhub 4000i
- Press the [8] key twice in the initial state of maintenance mode. "Reset- Laser Unit" is displayed on the LCD.
- Press the [▲] or [▼] key to display the part with the counter to be reset on the LCD, and press the [Mono] key.
- "*******OK?" is displayed on the LCD. Press the [Mono] key to reset the counter for the selected part and return the display to the procedure (2). (******* represents the name of the selected part)
- Press the [X] key, and the machine returns to the initial state of maintenance mode.
Selectable parts are shown in the table below.
LCD | Part name | Counter to be reset |
---|---|---|
Reset-Laser Unit | Laser unit | Printed pages counter |
Reset-Fuser Unit | Fuser unit | Printed pages counter |
Reset-PF Kit T1 | PF kit 1 | Printed pages counter |
Reset-PF Kit T2 | PF kit 2 | Printed pages counter |
Reset-PF Kit T3 | PF kit 3 | Printed pages counter |
Reset-PF Kit T4 | PF kit 4 | Printed pages counter |
Reset-PF Kit MP | PF kit MP | Printed pages counter |
Reset-LVPS | Low-voltage power supply PCB ASSY | Irregular power supply detection counte |