Konica-Minolta bizhub 5000i
Maintenance Mode. 2. List of Functions
Function code | Function |
---|---|
01 | Initialize EEPROM parameters |
09 | Print quality test pattern |
10 | Set worker switches |
11 | Print worker switch (WSW) setting data |
12 | Check LCD operation |
13 | Check control panel key operation |
25 | Display software version |
28 | Change setting for OnePushDemo function |
32 | Check sensor operation |
33 | Display LAN connection status |
45 | Change USB No. return value / Adjust left-end print start position on second side when duplex printing / Set HEXDUMP mode / Switching of the function corresponding to the high altitude drum error |
46 | Adjust printable range for each speed level (Full speed / Half speed for thick paper / Quiet Mode) |
61 | Adjust touch panel |
67 | Continuous print test |
69 | Print frame pattern (single-side printing) |
70 | Print frame pattern (duplex printing) |
71 | Print test pattern |
74 | Configure for country/region and model |
77 | Print maintenance information |
78 | Check main fan operation |
80 | Display machine log information |
82 | Display machine error code |
88 | Reset counters for consumable parts |
91 | Initialize EEPROM parameters |
99 | Quit maintenance mode |
* The maintenance mode functions shaded in the table can be used by end users.