Konica-Minolta bizhub 423

Service Mode
Test Mode	Gradation Pattern
	Halftone Pattern
	Lattice Pattern
	Paper Passage Test
	Fax Test
ADF	Original Stop Position *8
	Registration Loop Adj. *8
	Auto Stop Position Adjustment *8
	Paper Passage *8
	Sensor Check *8
	Original Tray Width *8
	Read Pos Adj *8	Read Pos Adj *8
		Auto Adjust *8
	Feed Zoom *8	Orig. Feed Zoom Ad *8
		Auto Adjust *8
	Scanning Light Adjustment *8
	Mixed Original Size adjustment *8
	FD-Mag. Adj. (B) *8	Orig. Feed Zoom Ad. *8
		Auto Adjust *8
FAX *1	Line 1 *1	Modem/NCU *1
		NetWork *1
		System *1
		Fax File Format *1
		Communication *1
		List Output *1
		Function Parameter *1
		Initialization *1
	Line 2 *2	Modem/NCU *2
		Network *2
		Communication *2
		Initialization *2
Finisher *3	FS-FN adjustment *3	Center Staple Position *3
		Half-Fold Position *3
		Punch Edge Adj *3
		Punch Regist Loop Size *3
		Finisher Components Test Mode *4
		Load Data *4
		Alignment Plate Position *5
		Paper Alignment Guides W. Adj. *3
	Punch Option setting
	Job Separator *6
Internet ISW	Internet ISW Set
	HTTP Setting *7
	FTP Setting *7
	Forwarding Access Setting *7
	Download *7

*1: It will be displayed only when the optional fax kit (FK-508) line 1 is mounted.
*2: It will be displayed only when the optional fax kit (FK-508) line 2 is mounted.
*3: It will be displayed only when the optional finisher (FS-527) is mounted.
*4: It will be displayed only when the optional finisher (FS-527/529) is mounted.
*5: It will be displayed only when the optional finisher (FS-529) is mounted.
*6: It will be displayed only when the optional separator (JS-505) is mounted.
*7: It will be displayed only when the [Internet ISW Set] is set to “ON.”
*8: It will be displayed only when the reverse automatic document feeder DF-621 is mounted.