Konica-Minolta bizhub 42
Service Mode. List of service mode
The function tree is shown to comply with the format displayed on the screen.
- *1: It will be displayed only when the optional paper feed cabinet PC-211 is mounted.
- *2: It will be displayed only when the optional finisher FS-529 is mounted.
- *3: It will be displayed only when the USB memory device is connected to the main unit.
- *4: It will be displayed only when the optional fax kit FK-509 is mounted.
- *5: It will be displayed only when the service call error is occurred.
| Service Mode | ||
|---|---|---|
| Serial Number | ||
| Firmware Version | Controller F/W | |
| Engine F/W | ||
| Boot F/W | ||
| Panel F/W | ||
| Fax F/W | ||
| Scanner F/W | ||
| Loadable Driver | ||
| Finisher F/W *2 | ||
| Printer Adjustment | Leading Edge Adjustment | Plain Paper |
| Thick 1 | ||
| Thick 2 | ||
| Envelope | ||
| Transparency | ||
| Lead Edge Adj Side 2 (Dx) | Plain Paper | |
| Leading Edge Adjustment Tray | Tray1 | |
| Tray2 | ||
| Tray3 | ||
| Tray4 *1 | ||
| Tray5 *1 | ||
| Side Edge Adjustment | Tray1 | |
| Tray2 | ||
| Tray3 | ||
| Tray4 *1 | ||
| Tray5 *1 | ||
| Left ADJ Duplex | Tray1 | |
| Tray2 | ||
| Tray3 | ||
| Tray4 *1 | ||
| Tray5 *1 | ||
| Image Transfer Current | Simplex Pass | |
| Manual Duplex | ||
| Fuser Temp Control | Plain Paper | |
| Thick1/Envelope | ||
| Thick2 | ||
| Transparency | ||
| Printer Reg Loop Adj. | Tray1 | |
| Tray2 | ||
| Tray3/4/5 | ||
| Duplex | ||
| Manual Bypass Tray Width Adj | ||
| Cooling Fan Stop Delay | ||
| Fusing Productivity Choice | ||
| Print Interval Extension | ||
| Gradation Adjustment | Gradation Adjustment | |
| MAX.Density Adjustment | ||
| Max Image Density Adj | ||
| TCR Level Setting | ||
| TCR Sensor Adjustment | ||
| Image Background Adj | ||
| Feed Zoom | Plain paper | |
| Thick1 | ||
| Thick2 | ||
| Envelope | ||
| Paper Separation Adjustment | First Side | |
| Second Side | ||
| Paper Separation Voltage Adj | Plain Paper | |
| Thick | ||
| Envelope | ||
| Transparency | ||
| Replenish Toner | ||
| Scanner Adjustment | FB Leading Edge | |
| FB Side Edge | ||
| ADF(F) Leading Edge | ||
| ADF(F) Side Edge | ||
| ADF(B) Leading Edge | ||
| ADF(B) Side Edge | ||
| FB CD Multiplier | ||
| FB FD Multiplier | ||
| ADF(F) CD Multiplier | ||
| ADF(F) FD Multiplier | ||
| ADF(B) CD Multiplier | ||
| ADF(B) FD Multiplier | ||
| Tilt(F) | ||
| Tilt(B) | ||
| Print Menu | Mgmt. List | |
| Event Log | ||
| Adjust Information | ||
| Element Page | ||
| Black 64 | ||
| Black 128 | ||
| Black 256 | ||
| Gradation | ||
| Scanner Adjustment | ||
| Scan Event Log | ||
| Lattice Pattern | ||
| Communication Log Print | ||
| Supplies | Life Counter Clear | Drum Unit (K) |
| Transfer Roller Unit | ||
| Fusing Unit | ||
| Developing Unit (K) | ||
| Developer Replace Count | ||
| Developer(K) | ||
| Ozone Filter | ||
| Paper Dust Remover | ||
| Feed Roller (Bypass) | ||
| Feed Roller (Tray2) | ||
| Feed Roller (Tray3) | ||
| Feed Roller (Tray4) *1 | ||
| Feed Roller (Tray5) *1 | ||
| Finisher Counter *2 | ||
| Firmware Update *3 | ||
| CS Remote Care | ||
| Clear Admin Password | ||
| CE Password | ||
| Soft Switch | ||
| Engine DipSW | ||
| Function | Comp. Check | |
| Sensor Check | ||
| Scanner Sensor Check | ||
| Finisher Check | ||
| Enable Warning | Toner Low | |
| Toner Change | ||
| Loadable Driver Information | ||
| System Settings | Installation Date | |
| Sleep ON/OFF Choice Setting | ||
| Foolscap Size Setting | ||
| Machine State LED Setting | ||
| Auto Drum Dry | ||
| Fluorescent Flicker Control | ||
| Marketing area | ||
| Service Fax Settings *4 | ||
| Trouble Reset *5 | ||
| Life Stop Setting | ||