-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Konica-Minolta bizhub 4052
Troubleshooting. Image Quality Problem. Printer 4
Printer: blurred image
Troubleshooting procedure
Step |
Section |
Check item |
Result |
Action |
1 |
Imaging unit |
Dirty on the outside. |
YES |
Clean. |
2 |
|
|
NO |
Replace the imaging unit. |
Replace the printhead. |
Printer: blank copy, black copy
Troubleshooting procedure
Step |
Section |
Check item |
Result |
Action |
1 |
Printhead |
A blank copy occurs. |
YES |
Check printhead connector for proper connection. |
2 |
Imaging unit |
Coupling of imaging unit drive mechanism is installed properly. |
NO |
Check and correct drive transmitting coupling. |
Replace the imaging unit. |
3 |
The PC drum charge corona voltage contact or PC drum ground contact of the imaging unit is connected properly. |
NO |
Check, clean, or correct the contact. |
4 |
Power supply unit |
Connector is connected properly. |
NO |
Reconnect. |
5 |
|
The problem has been eliminated through the check of step 4. |
NO |
Replace the power supply unit. |
Replace the printhead. |
Replace the MFP board. |
Printer: uneven image
Troubleshooting procedure
Step |
Section |
Check item |
Result |
Action |
1 |
Toner cartridge |
The toner cartridge is surely installed. |
NO |
Re-install it. |
2 |
Printhead |
The printhead is surely installed. |
NO |
Re-install it. |
3 |
Toner cartridge |
There is any stain or breakage on the drive section of the toner cartridge. |
YES |
Clean/replace the toner cartridge. |
4 |
Imaging unit |
There is any stain, damage or abrasion on the PC drum. |
YES |
Replace the imaging unit. |
5 |
Transfer roller |
There is any stain, damage, deformation or abrasion on the transfer roller. |
YES |
Replace the transfer roller. |
6 |
Fuser unit |
There is any stain, damage, deformation or abrasion on the roller and drive section of the fuser unit. |
YES |
Replace the fuser unit. |
7 |
|
The problem has been eliminated through the check of step 6. |
NO |
Replace the printhead. |