Konica-Minolta bizhub 4000P

Flash Test

This test verifies the condition of the flash device by writing data to it and then reading data from it.

Warning—Potential Damage: This test destroys all data on the flash device.

Note: After this test is executed, reformat the flash using the Flash Format setting in the Utilities menu.

1. From the Diagnostics menu, navigate to:
   Device Tests >Flash Test
   Files will be lost. Go/Stop? appears.
2. Do one of the following:
   - Press [OK] to continue.
   - Press ✖ to cancel.
   Note: When the test starts, it cannot be stopped or canceled.
3. After the test is complete, a message appears indicating a pass or fail result.
4. Press ✖ to return to the Device tests menu.
5. Reformat the flash device using the Flash format setting in the Utilities menu.