Konica-Minolta bizhub 4000P

Feed Tests

This test feeds blank pages through the paper path. It can run using any of the paper or envelope sizes supported by the printer.
To run the Feed test:

1. From the Diagnostics menu, navigate to:
   Input Tray Tests >Feed Tests
2. Choose the input source. All installed sources appear.
3. Choose any of the following:
   - Single—Feeds a single page.
   - Continuous—Continuously feeds pages until is pressed.

Sensor Test

Use this test to determine if the input tray sensors are working correctly.

1. From the Diagnostics menu, navigate to:
   Input Tray Tests >Sensor Test
2. Select the input source. All installed sources appear.
   Not all sensors appear for all trays. The following table indicates which tray sensors are available for each input source:

   Input source	Tray empty sensor	Pass through sensor
   Standard tray	✔
   Optional 250-/550-sheet tray	✔	✔
   Multipurpose feeder	✔

3. Manually actuate each sensor. The tray empty sensor can be actuated by hand; however, a sheet of paper can be used to cover the pass through sensor.
4. Press ✖ to exit the test.