Konica-Minolta bizhub 361
Service Mode. List of service mode 2
| Adjustment/setting items | |||
|---|---|---|---|
| System 1 | Initialization | Service Mode Setting (Adj.) Data |
Image Process Adj. Data |
| Machine and ADF Adjustment Data | |||
| Counter Data | Drum Counter | ||
| Fixing Counter | |||
| All History Data | |||
| Machine State LED Setting | |||
| Counter | Total Service | ||
| Fax Communication Error | |||
| Mode | |||
| ADF Counter | |||
| Service Call | |||
| JAM | |||
| Present Parts Life | |||
| Optional Parts Life | |||
| PM | |||
| Reuse | |||
| Each Size | |||
| Pape Jam History | |||
| Jam Counter History | |||
| Time Series Trouble (SC) | |||
| Each Section Trouble (SC) | |||
| State Confirmation | Sensor Check | ||
| Load Check | |||
| Memory/HDD Condition | |||
| Memory/HDD Adjust- ment | Memory Check | ||
| HDD R/W Check | |||
| HDD Format | |||
| Adj. Data Table | |||
| ADF | Paper Feed Direction | ||
| ADF Adjustment:Lead Edge | |||
| ADF Adjustment:Side Edge | |||
| Resist Loop Adj. | |||
| Original Size Adj. | |||
| Density Adj. | |||
| Scan Position Adjustment | |||
| Sensor Auto Adjustment | |||
| Finisher | Center Staple Position | ||
| Half-Fold Position | |||
| Punch Horizontal Position | |||
| Punch Resist Loop | |||
| Firmware Version | |||
| CS Remote Care | |||
| System 2 | Data Capture | ||